Piaggio Boxer EV: January 2010 Archives

The weather was finally nice enough to commute to work this week on my Piaggio Boxer EV with Prius NiMH batteries.

Here's the data from my CycleAnalyst:

Run #1
1.18
(To)
Run #2
1.18
(From)
Run #3
1.19
(To)
Run #5
1.20
(To)
Distance5.2 km4.85 km4.21 km4.19 km
Efficiency45.1 Wh/km39.2 Wh/km42.2 Wh/km47.6 Wh/km
Energy used234.23 Wh189.87 Wh176.92 Wh199.03 Wh
Charge Used5.90 Ah4.28 Ah4.01 Ah5.01 Ah
Max Amps106 A101 A91 A101 A
Average Speed20.6 km/h23.3 km/h24.8 km/h24.1 km/h
Max Speed36.6 km/h40.3 km/h39.0 km/h36.6 km/h
Starting voltage---49.950.247.2
Ending voltage43.8v45.9v---44.2v
Run time15 min12:3010:1010:24

My commute is slightly uphill on the way to work and downhill on the way back, which accounts for the difference in energy efficiency going to and from work.

The bike feels much lighter than with the SLAs and faster too (even with the gear reduction) so I have to say it's an unqualified success. I just hope I can get good life out of these batteries.

After Run #4, I was in a rush and so I put the charger on and went to a talk and then came back. About 3 hours had passed and the charger had over charged the batteries. It actually wedged the battery holder apart. So I'm worried now that my batteries will be weakened -- even though most of the bulging has subsided.

I reinforced the battery holder this morning and we'll see how it holds up.

About this Archive

This page is a archive of entries in the Piaggio Boxer EV category from January 2010.

Piaggio Boxer EV: December 2009 is the previous archive.

Piaggio Boxer EV: August 2010 is the next archive.

Find recent content on the main index or look in the archives to find all content.