Some miscellaneous notes that are bouncing around my head.
- The Phoenix HV-110 has a listed max volts of 50 volts, which I thought would mean I could use 40 NiMH cells, with a nominal voltage of 48 Volts. However, you are limited to 36 cells NiCd/NiMH which gives a max nominal voltage of 43.2V. This is a little bit of a bummer since I had planned on doing 5S packs of 9.6V which would have given me 48V. I think this is because although the nominal voltage is 48V in that case, the peak voltage (fresh off the charger) can be in excess of 60V and the FETs most probably aren't rated that high.
- It turns out that I could've bought the 180 kV motor instead of the 130 kV motor. As it stands, I'll either have to get a smaller V-belt or a larger front pulley if I want a max speed of 45 kph (30 mph). No worries.
- I'm wondering what the best way to charge my NiMHs is. They don't sell many 38.4 V chargers, so I may just stick with 2 x 19.2 volt chargers and charge 2 packs at a time. I may want to get even more chargers so I can do the entire megapack at the same time.
Leave a comment